Miscellaneous Service Parts

Edstrom has all the parts you need for your Sprinkler & Soaker Systems. Keep livestock comfortable with cooling systems, controls, and service parts. We carry systems and parts for your dairy, swine and agriculture operations.

If you need replacement parts, we’re here to help. Shop our selection of miscellaneous and replacement parts. If you can’t find what you’re looking for, contact us or if you prefer to call, please contact us at 800-558-5913 or 262-534-5181.

Cattle Cooling Mechanism
Winterizing your Watering System

When the weather becomes cold where you live, it’s important to consider your automated watering system. The Edstrom Automated Watering System has been designed for use in facilities that are not exposed to freezing temperatures. If you live in a climate that gets very cold, the system must be installed in a heated building if you are to continue using it in the winter months.

If you live in an area that only experiences mild, overnight freezing temperatures you may consider doing one of the following:

  • Turn off the water supply in the evening and allow animals to drink the system dry overnight.
  • Open the drain valve at the end of each line allowing a slow trickle of water to run continuously.

Freezing temperatures very seldom damage the flex-tube system, however, there is no easy method to protect it from freezing. The use of electrical heat tapes is NOT recommended with this type of system. Heat tape can be installed on a rigid PVC pipe system, using care to install according to manufacturer’s instructions. The tape should be located in a position that cannot be accessed by the animals. To protect yourself and your animals from possible electrical shock when using a heat tape, it is suggested that the electrical circuit supplying the heat tape be set up with a Ground Fault Interrupter (GFI) device.

A rigid pipe system is more susceptible to damage by water freezing inside the lines. PVC lines should be drained to avoid the possibility of the pipe or fittings being split by freezing water. It is also a good idea to drain the flex-tube system. Both types of watering systems can remain installed throughout the months of non-use.

Set Descending Direction

45 items

Page
per page
  1. Quick-Connect Nozzle Cap & Gasket
    Quick-Connect Nozzle Cap & Gasket 2320-1923-100
    $1.10
  2. Butterfly Handle Ball Valve 3/8
  3. Butterfly Handle Ball Valve 1/4
  4. Punch for installing Drip Nozzles
    Punch for installing Drip Nozzles 4500-4492
    $4.05
  5. Spinner Nozzle Spray Assembly 2.6-20
    Spinner Nozzle Spray Assembly 2.6-20 2320-6184-200
    $27.00
  6. Spinner Nozzle Spray Assembly 2.5-30 Spinner Nozzle Spray Assembly 2.5-30
    Spinner Nozzle Spray Assembly 2.5-30 2320-6184-100
    $27.00
  7. Shower Nozzle, 1/3 circle - 8 ft radius, 0.93 GPM (tip only)
  8. Shower Nozzle, 1/3 Circle, 8' Radius, 0.60 GPM, (Tip Only)
  9. Shower Nozzle, 1/3 Circle, 8 Foot Radius, 0.50 GPM (Tip Only)
  10. Nozzle Cap, Quick-connect, & gasket (Yellow)
    Nozzle Cap, Quick-connect, & gasket (Yellow) 2320-1923-200
    $1.10
Set Descending Direction

45 items

Page
per page

Winterize your Watering System

When the weather becomes cold where you live, it’s important to consider your automated watering system. The Edstrom Automated Watering System has been designed for use in facilities that are not exposed to freezing temperatures. If you live in a climate that gets very cold, the system must be installed in a heated building if you are to continue using it in the winter months.

If you live in an area that only experiences mild, overnight freezing temperatures you may consider doing one of the following:

  • Turn off the water supply in the evening and allow animals to drink the system dry overnight.
  • Open the drain valve at the end of each line allowing a slow trickle of water to run continuously.

Freezing temperatures very seldom damage the flex-tube system, however, there is no easy method to protect it from freezing. The use of electrical heat tapes is NOT recommended with this type of system. Heat tape can be installed on a rigid PVC pipe system, using care to install according to manufacturer’s instructions. The tape should be located in a position that cannot be accessed by the animals. To protect yourself and your animals from possible electrical shock when using a heat tape, it is suggested that the electrical circuit supplying the heat tape be set up with a Ground Fault Interrupter (GFI) device.

A rigid pipe system is more susceptible to damage by water freezing inside the lines. PVC lines should be drained to avoid the possibility of the pipe or fittings being split by freezing water. It is also a good idea to drain the flex-tube system. Both types of watering systems can remain installed throughout the months of non-use.