Manifolds

Water Distribution Manifolds

A water manifold is used to distribute water to individual drinking valve locations within an animal rack or enclosure.

Manifold Types

Consisting of several sections of stainless steel tubing a manifold is attached directly to an animal cage rack or enclosure. Manifolds are connected to the Room Distribution System via quick disconnects and hoses to allow for flexibility in movement and connection. There are multiple configurations for manifolds that are used on a variety of animal cage racks. A typical design for Individually Vented Cage (IVC) racks is a Reverse ‘S’ design. This design fills the manifold with water from the bottom up, thereby naturally venting out the air as well as allowing for the complete exchange of water in all levels of the manifold. Other configurations are available for other animal rack/enclosure types. 

Reverse S Design

Edstrom Manifold                                              Manifolds 2

Contact Avidity Science

Set Descending Direction

10 Items

per page
  1. Manifold Repair Section DF
    Manifold Repair Section DF 1340-0640-002
    £23.93
  2. Manifold Repair Section SF
    Manifold Repair Section SF 1340-0640-001
    £20.16
  3. Spring Clip Drain-Vent Valve Spring Clip Drain-Vent Valve
    Spring Clip Drain-Vent Valve 3040-0815
    £0.24
  4. Stainless Steel Quick Disconnect Rack Reservoir 2-Gallon Stainless Steel Quick Disconnect Rack Reservoir, 2-Gallon
  5. Reservoir Stand Shelf MT
    Reservoir Stand Shelf MT 2311-0681
    £197.06
  6. Lid 2 Gallons Lid 2 Gallons
    Lid 2 Gallons 2310-8594
    £12.80
  7. Elbow PP 5/8 C x 1/2 F Elbows PP 5/8 C x 1/2 F
    Elbow PP 5/8 C x 1/2 F 1620-7989-009
    £9.89
  8. Elbow PP 1/4 C x 1/4 F Elbow PP 1/4 C x 1/4 F
    Elbow PP 1/4 C x 1/4 F 1620-7989-003
    £4.41
  9. Elbow PP 1/4 C x 1/4 M Elbows PP 1/4 C x 1/4 M
    Elbow PP 1/4 C x 1/4 M 1620-6009-001
    £4.44
  10. Polyethylene Tubing 1/4
    Polyethylene Tubing 1/4" 1600-1427
    £0.81
Set Descending Direction

10 Items

per page