Tubing & Cable

(Scroll Down for Installation Instructions)

Set Descending Direction

40 items

per page
Set Descending Direction

40 items

per page


Installing your watering system is easy. Once you have all of the components you need, grab a pair of scissors and get started!

Step 1: Cut black tubing to appropriate length for cages and push the tubing into the Tee Barbed Fittings.

Connect Flex Tubing Connect Tee Barbed Fittings


Step 2: Slide the barbed connection of the drinking valve through hole in the Valve Clip and squeeze clip onto the cage.

Edstrom Valve in Clip Edstrom Valve in Cage

Step 3: Place drinking valve on the side of the cage where it will be easily accessible to your animal or bird. Attach supply line to cages with Stand-Offs

Edstrom Valve Standoff



Step 4: Extend additional short length 3/16" Flex-Tubing from the bottom of the Tee Barbed Fitting down to the drinking valve.

Edstrom Flex Tube to Edstrom Valve

Step 5: Place the Drain-Vent at the end of the line for flushing purposes.

Edstrom Drain Vent



Step 6: If a Shut-Off Valve is desired, it is pushed onto the Flex-Tubing at the beginning of the line to easily turn off water for individual rows.

Edstrom Shut Off Valve


Step 7: Connect start of the Flex-Tubing to water supply. If a storage or float tank is used, it should be placed 12-36" above the top row of cages to ensure adequate water pressure.

Connect Edstrom Flex Tue to Water Supply