We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies Learn more.
Puro™ Type 3 Water | Reverse Osmosis Water Purification System
The Puro™ produces Type 3 (RO) water in high demand
- RO water / Type 3 water
- Up to 25, 45 or 85L/hr production rates
- Low running costs
- One easy to change pre-filter
- Mount on bench, wall or on top of a reservoir
- Intuitive, icon-based, interactive user interface with touchscreen
- Excellent monitoring of conductivity
- Integrated leak detector and boost pump
- Choice of storage reservoirs: 30, 60 or 100 liters
Availability:
In stock
SKU
PURO
Puro™ - Pure Water In High Demand
The Puro™ water system produces high-quality water with low energy consumption through the use of innovative low energy RO technology. By using a specially designed recirculation system, the RO membranes are guaranteed a long service life.
The Puro™ recovers a percentage of water processed, due to the innovative configuration of the RO membrane (see flowchart below). Feed water that does not meet the required standard is recycled back around the system rather than being sent to the drain. Not only does this reduce waste water and increase efficiency, it results in low running costs.
Type 3 Water Applications
The Puro™ is suitable for Type 3 / RO water use from 10-1000 liters per day. RO water is typically used for the following applications:
- Glasswasher Feed
- Autoclave Feed
- Feeding Ultrapure Water Systems
- Hydroponics
- Steam Generators
Features
- RO water / Type 3 water
- Up to 25, 45 or 85L/hr production rates
- RO sanitization process
- Low running costs
- One easy to change pre-filter
- Mount on bench, wall or on top of a reservoir
- Intuitive, icon-based, interactive user interface with touchscreen
- Integrated leak detector and boost pump
- Choice of storage reservoirs: 30/60/100 liters
- Variable permeate flowrates
The integral boost pump simplifies installation and avoids unexpected costs or reduced flow rates due to poor inlet pressure. The Puro™ is fed directly from your mains water supply.
The Reverse Osmosis Process and How it Works
Reverse Osmosis (RO) is a process used to separate and remove a large majority of water contaminants using a semi-permeable membrane. This is a very economical method as it can remove up to 99% of organics, bacteria and particulates from feed water. During this process, feed water flows through a semi-permeable membrane under pressure. The water molecules will pass through, while contaminants are deposited on the membrane surface and flushed to drain as concentrate. This can be fed back into the feed water supply to be recycled, helping to save water waste.
Puro™ Technical Specifications
Type 3 water using Reverse Osmosis technology
The Puro™ water system produces high-quality water with low energy consumption through the use of innovative low energy RO technology. By using a specially designed recirculation system, the RO membranes are guaranteed a long service life.
- Recovers a percentage of water processed through the RO membranes
- RO water / Type 3 water
- Up to 25, 45 or 85L/hr production rates
- Low running costs
- One easy to change pre-filter
- Mount on bench, wall or on top of a reservoir
- Intuitive, icon-based, interactive user interface with touchscreen
- Excellent monitoring of conductivity
- Integrated leak detector and boost pump
- Choice of storage reservoirs: 30, 60 or 100 liters
PRODUCT WATER QUALITY
|
MODEL |
RO MAKE UP RATE (@15 °C) |
INORGANICS REJECTION RATE** |
RO QUALITY (@25 °C) |
RECOMMENDED DAILY USAGE: |
| PURO20 | Up to 25 L/hr | 98 % | < 40 µS/cm | 160 L/day |
| PURO40 | Up to 45 L/hr | 98 % | < 40 µS/cm | 320 L/day |
| PURO80 | Up to 85 L/hr | 98 % | < 40 µS/cm | 640 L/day |
** Depending on feedwater impurities
SYSTEM REQUIREMENTS
|
FEED WATER |
|
|
| Pressure (PURO20 & PURO40) | Bar | 0.1 - 6 |
| Pressure (PURO80) | Bar | 2 - 6 |
| Conductivity | μS/cm | < 1400 |
| Temperature | °C | 4 - 30 |
| Hardness as CaCO3 | ppm | < 400 |
| Free Chlorine | ppm | < 2 |
| Colloid Index | SDI | < 3 |
| pH Value | 4 - 10 | |
| Iron (Total Fe) | ppm | < 0.1 |
UNIT SPECIFICATIONS
|
ALL MODELS |
|
| Dimensions (HxWxD) | 500 x 490 x 290 mm |
| Installed Weight | 23 kg |
| Power Supply | 100 - 240 V ~; 50/60 Hz; 3.0 A (max) |
| Power Supply Output | 24 VDC, 5.0 A, 120 W (max) |
| Operating Temperature | 4 °C - 35 °C (max) |
| Storage Temperature | 4 °C - 35 °C (max) |
UTILITIES AND SERVICES
|
REQUIREMENTS |
|
| Water Supply | Isolated cold-water feed |
| Drain Type | Sink/Tundish/Standard up-stand with suitable trap |
| Drain Flow | > 3 L/min |
CONSUMABLES & ACCESSORIES
|
PART NUMBER |
DESCRIPTION |
TYPICAL ANNUAL REQUIREMENT |
| TC001 | Pre-treatment Module | 2* |
| TC005 | Tank Vent Filter | 1 |
| TANK30 | 30 Liter Tank | - |
| TANK60 | 60 Liter Tank | - |
| TANK100 | 100 Liter Tank | - |
| TANK100P-1 | 100 Liter Tank with Pump - 230V | - |
| TANK100P-2 | 100 Liter Tank with Pump - 110V | - |
| AV003 | Distribution Pump Kit | - |
| AV004 | Valve Kit for Washing Machine Feed (Single POU) | - |
| AV006 | Wall Mounting Kit | - |
| AV007 | External Pre-filter Housing Kit (Excludes Filter) | - |
| AV008 | Wall Mounting Kit (TANK30) | - |
| AV009 | Wall Mounting Kit (TANK60) | - |
| AV012 | UV Upgrade Kit (TANK30/TANK60/TANK100) | - |
| AV014 | Level Sensor Kit (Custom) | - |
| AV016 | Valve Kit for Washing Machine Feed (Double POU) | - |
| AV034 | RO Sanitizing Kit for Duo, Geno and Puro | - |
| AV037 | IQOQ Documentation for Puro | - |
*Depending on Feed Water Quality and Usage
TYPE 3 WATER
|
APPLICATIONS |
| Autoclave Feed |
| Glasswasher Feed |
| Feed to Ultrapure Water Systems |
| Hydroponics |
| Steam Generators |
PURO™ FLOW CHART
RESERVOIRS
|
WIDTH |
HEIGHT |
DEPTH |
|
|
TANK30 |
480 mm |
495 mm |
230 mm |
|
TANK60 |
480 mm |
495 mm |
330 mm |
|
TANK100 |
480 mm |
810 mm |
360 mm |
|
TANK100PUMP* |
480 mm |
810 mm |
360 mm |
*100 litre tank with built-in pump to provide the correct pressure for feeding washing machines, glasswashers and remote points of use.
- Including dispense tap on front of reservoir in the middle or at the bottom
- 3/4” BSP glass-washer outlet
- Pressure sensor level control, with a 0-100 % contents display
- 0.2 μm microbiological air vent filter or an optional CO2 filter
- 30 and 60 liter reservoirs are wall mountable
OPTIONAL LEAK DETECTION
If your water system is in a location where a leak could cause damage or health and safety issues, we recommend that you protect against this possibility by means of a leak detector, or for larger systems a containment bund. Containment bunds, price available on application. The following are available from Avidity Science:
|
PART NO. |
DESCRIPTION |
|
2084 |
Water Guard for small laboratory equipment up to 100 L/h |
|
00029 |
Water Guard for larger equipment with a feed connection up to ¾” |
-
Tanks for Point of Use Water PurificationFeatures & Benefits:
- Made from high-quality virgin polyethylene
- Designed to be fully drainable
- Smooth, crevice-free interior
- Connections to feed a laboratory dishwasher
- Dispense tap can be mounted in the middle of the unit or at the bottom
- Optional UV Light
