Pico | All-In-One DI Water System | PICO20T2


  • Patent pending design for whisper quiet, vibration free operation
  • Compact design with integrated reservoir
  • Simple maintenance with user replaceable cartridges and color-coded service connection points
  • Low energy consumption (<60W)

 Installation requirements:

             Connection to facility’s potable water line.   Feed water to have:
             Pressure:                                  5 – 85psi
             Free Water Conductivity:        < 1400 µs / cm
             Temperature:                            45 - 90°F
             Free Chlorine:                          < 0.1 mg / liter
             Carbon Dioxide (CO₂):             < 15 mg / liter
             Iron:                                           < 0.1 mg / liter
             pH:                                              3.0 – 9.0

**Local water conditions may dictate additional pretreatment to achieve specified performance

  • PICO can be wall or bench mounted.   Benchtop must withstand 133 lbs. which is the weight of the unit full. Wall mounting kit can be purchased separately.
  • Install in a contained floor space with properly designed floor and floor drains in case of water spillage.
Availability: In stock

Pico™ is an all-in-one, pure water system with the smallest footprint among comparable units.  This model produces Type 2 DI (deionized) water at a 20 liters per hour rate and includes a built-in 35-liter reservoir tank.  Energy efficient and budget-friendly, Pico costs less than one penny per liter of water produced. 

Pico's patent-pending design for whisper quiet, vibration-free operation.  The systems have also been engineered for ease of use and simple ownership. They can be installed and serviced by the user utilizing the provided installation kit and easy to follow instructions. And changing out Pico's consumables is a snap - simply follow the color-coded service connection points and the job is done in minutes.

The Pico series has the following add-ons if the installation location requires:   

  • Wall Mounting Kit: 1330-3000-003
  • Prefilter for Foul Feedwater:   2100-3000-001 
  • Pump for Automatic Distribution:  2300-3000-001  

Product Guide

Model Water Quality Typical Applications Weight and Dimensions
Pico T3 Type 3 Supply for:  

Primary Grade Water

Type 3 RO Water

Higher Purity Water Systems

Final Rinse Glass Washers

Steam/humidity Generators

Growth/Stability Chambers

 (H x W x D)

500 x 485 x 330 mm

20 kg (empty)

Pico T2 Type 2 Many general laboratory applications requiring higher iconic purity:  

General Laboratory Grade Water

Type 2 DI Water

1-15 MΩ-cm

Buffer make up

Media production

Sample dilution and reagent preparation

General chemistry

Teaching applications

(H x W x D)

500 x 485 x 330 mm

20 kg (empty) 

More Information
Product Name Pico | All-In-One DI Water System | PICO20T2
SKU 7120-3000-220
Feed Water Source Tap
Industry Life Science, Vivarium
Max Daily Usage 120 l/day
Water Quality 1 - 15MΩ-cm
Product Rate 20 l/hr
ISO 9001 No
ISO 17025 No
Write Your Own Review
You're reviewing:Pico | All-In-One DI Water System | PICO20T2