Geno™ Type 2 Water | Deionized Water Purification System

Features & Benefits:

  • Low running costs.
  • Integral boost pump.
  • Novel recirculation loop extends the life of membranes and cartridges.
  • Choice of production rate
  • Choice of storage tank size:  30, 60, or 100 liters.
  • Bench, wall or reservoir top mounting.
  • Easy to change consumables with realistic costs.
  • >50% recovery of RO water
  • Up to 98% rejection of inorganics
  • SD Card interface

*Wall Mounting Brackets Included

Availability: In stock

The Geno(TM) water purification system is a complete, pre-engineered system designed specifically for Type 2 water applications.  The reverse osmosis system uses pressure to separate contaminates out of supply water using a semipermeable membrane.  The RO water is then fed through ion-exchange resins to deionize the water, creating Type 2 laboratory grade water.

With the addition of the endure deionization packs, Geno takes RO water to the next level of purity. Geno provides laboratory grade, Type 2 water in three convenient production rates of 10, 20 or 50 liters per hour.  Select the reservoir size to suit your requirements. 

Geno combines all required technologies to produce Type 2 water in one box.  The endure DI packs are simple to change and long lasting.

Geno is suitable for Type 2 / DI water usage of 10 - 600 liters per day.  Di water is suitable for buffer and media production, sample and reagent diluents, general chemistry, protein electrophoresis, histology, cytology, and spectrophotometry.   The integral boost pump simplifies installation and avoids unexpected costs.  Geno is fed directly from your municipal water supply. 

Deionization is a process that removes ions from RO water with the use of synthetic resins.  The ions are removed from the water through a series of chemical reactions.  These reactions occur as the water passes through the ion exchange resins beads.  Gradually, all unwanted ions are replaced by hydrogen and hydroxyl ions which combine to form pure water.

Deionization is the only process that can produce the quality required for Type 2 water.

  Geno 10 Geno 20  Geno 50
Resistivity  1 - 15MΩ-cm 1 - 15MΩ-cm 1 - 15MΩ-cm
Production Rate at 15°C 10 l/hr 20 l/hr 50 l/hr
Overall Rejection Rate 98% 98% 98%
Rejection Rate for Bacteria >99% >99% >99%
Rejection Rate for Particles >99% >99% >99%
Feed Water Pressure 1.4 - 87 psi 1.4 - 87 psi 1.4 - 87 psi
More Information
Product Name Geno™ Type 2 Water | Deionized Water Purification System
ISO 9001 No
ISO 17025 No
Write Your Own Review
You're reviewing:Geno™ Type 2 Water | Deionized Water Purification System