Puro RO Water Systems

  • RO water / Type 3 Water
  • Low running costs
  • One easy to change pre-filter
  • Make-up rates ranging from 10-80 litres per hour
  • Mount on the bench, wall or on top of the reservoir
  • Choice of storage reservoirs: 30/ 60/100 litres

Download Brochure

Availability: In stock
SKU
PURO-1

Environmentally Friendly RO Water

Using the most advanced Reverse Osmosis (RO water) technology available, the Puro efficiently removes up to 99% of the contaminants from your mains water feed to produce primary RO water. The Puro offers you a small footprint solution to feed glass washers or other laboratory equipment.

Features

  • Low running costs
  • One easy to change pre-filter
  • Make-up rates ranging from 10-80 litres per hour
  • Mount on the bench, wall or on top of the reservoir
  • Choice of storage reservoirs: 30/ 60/100 litres

Puro is suitable for Type 3 / RO water usage of 10-1000 litres per day. RO water is suitable for feeding glass-washers, autoclaves, steam generators and stability chambers, also to feed ultrapure water systems such as Alto. The integral boost pump simplifies installation and avoids unexpected costs or reduced flow rates due to poor inlet pressure. Puro is fed directly from your mains water supply.

 Environmentally Friendly

Puro Reverse Osmosis Water System

Type 3 water using reverse osmosis technology

The Puro water system produces high-quality water with low energy consumption through the use of innovative low energy RO technology. By using a specially designed recirculation system, the RO membranes are guaranteed a long service life. 

- >50% recovery of RO water
- Excellent monitoring of conductivity
- Internal boost pump included to cope with varying inlet water pressure
- Full set of consumables included
- Integrated automatic membrane rinse cycle
- SD card interface
- Bench, tank or wall mounting options
- Wall mounting installation kit included

30/60/100 litre capacity reservoirs available              

Dimensions 

Width

Height

Depth

490mm

500mm

290mm

Annual Consumables 

Part No.

Description

TC001

Pre-treatment module (2)

TC005

(Reservoir) vent filter (1)

Accessories 

Part No.

Description

TC008

Tank UV

Reservoirs 

Width

Height

Depth

TANK30

410mm

500mm

240mm

TANK60

485mm

500mm

330mm

TANK100

485mm

800mm

340mm

TANK100PUMP*

485mm

800mm

340mm


*100 litre tank with built-in pump to provide the correct pressure for feeding washing machines, glasswashers and remote points of use.

- Including dispense tap on front of reservoir in the middle or at the bottom
- 3/4” BSP glass-washer outlet
- Pressure sensor level control, with a 0-100% contents display
- 0.2μm microbiological air vent filter or an optional CO2 filter
- 30 and 60 litre reservoirs are wall mountable

Services required

3/4” BSP isolated cold water feed (washing machine tap/valve)

240 Volt, 13 Amp sockets

Drain/up-stand with trap or sink/tundish

Optional leak detection

If your water system is in a location where a leak could cause damage or health and safety issues, we recommend that you protect against this possibility by means of a leak detector, or for larger systems a containment bund. Containment bunds, price available on application. The following are available from Triple Red: 

Part No.

Description

2084

Water Guard for small laboratory equipment up to 100 l/h

00029

Water Guard for larger equipment with a feed connection up to ¾”

  1. Laboratory Water Consumables

    We supply consumables for all types of laboratory water systems including:

    • Pre treatment cartridges
    • RO cartridges
    • DI cartridges
    • UV lamps
    • Point of use filters

    Submit a quote request and we'll send you a price.

    Download Lab Water System Brochure

    POA
Write Your Own Review
You're reviewing:Puro RO Water Systems