The Pico™ is the latest addition to the Avidity Science range of high quality water systems which are manufactured in the UK to ISO9001:2015 certification. The Pico™ is a complete, “all in one” water purification system which provides general laboratory water with many unique features. It has low energy consumption, minimal water wastage and maximises the use of your laboratory space. It is the most environmentally friendly product on the market.
The Pico™ utilises proven water purification technologies to provide Type 2 (Deionised Water) or Type 3 (Reverse Osmosis) water, on request.
The intuitive touch-screen control panel gives you instant access to the data you need. Check-up on water quality and how many litres are available in the tank, without taking your gloves off.
The economic benefits of the Pico™ range continue throughout the life of the product. Replacement of the modules has been designed with ease in mind, meaning that the user can carry out basic and essential maintenance tasks themselves.
The unique reverse osmosis (RO) cartridge has an in-built pre-treatment which only requires changing once per year (dependent on usage). This maintains optimum performance as there is no deterioration of quality from an over-worked RO membrane. The high recovery rate means the cost of waste water is also kept to a minimum.
It is recommended that a full mechanical service is completed by an Avidity Science trained Service Partner on an annual basis to maintain the integrity of components.
All models in the range are supplied with the first set of consumables, meaning they are ready to plug-and-go.
|Model||Water Quality||Typical Applications||Weight and Dimensions|
|Pico T3||Type 3||Supply for:|
Primary grade water
Type 3 RO Water
Higher purity water systems
Final rinse glass washers
(H x W x D)
500 x 485 x 330mm
|Pico T2||Type 2||Many general laboratory applications requiring higher iconic purity:|
General laboratory grade water
Type 2 DI Water
Buffer make up
Sample dilution and reagent preparation
(H x W x D)
500 x 485 x 330mm
|Model||Make-up Rate (@ 15°C)||Water Quality||TOC||Organics Rejection Rate||Daily Usage (Max)|
The above specification is only achieved when the feed water requirements are met.
|Feed Water Requirements|
|Pressure||Bar||0.1 - 5|
|Free Chlorine and Iron||mg/l||0.1|
Keep the integrity of your stored water and choose our mercury-free UV option.
For complete flexibility when installing the Pico™ system, opt for a wall mounting bracket. This simplistic design allows the user to easily and quickly mount the system onto any suitable wall to maximise the laboratory space.
|Option (Product Code)||Description|
|PICOUV||Tank UV Kit|
|PICOWB||Wall Mounting Bracket|
|PRESPUMP||Automatic Distribution Pump|
|PREFILTER||Pre-filter for high fouling water|
|Item||Product Code||Typical Frequency|
|Pre-treatment Module (RO) 10lph||TC021||Annual|
|Pre-treatment Module (RO) 20lph||TC022||Annual|
|Air Vent Filter (Tank)||TC024||Annual|
*Change frequency of DI Module dependent upon usage.