Geno DI Water Systems

Geno DI water systems for laboratories and hospitals. Producing general laboratory water, type 2 laboratory water

  • Low running costs
  • Easy to change consumables with realistic costs
  • Bench, wall or reservoir top mountin
  • Choice of storage reservoir, 30, 60 or 100 litres
  • Choice of production rates depending on how much water you need during the day
  • Integral boost pump
Download Brochure


 

Availability: In stock
SKU
GENO

Innovative Endure Purification Packs save you money

The Geno takes RO water to the next level of purity, providing DI laboratory grade water in three convenient production rates of 10, 20 or 50 litres per hour. The Geno combines all the latest technologies to produce DI water. The Endure DI packs are simple to change and long lasting.

Features 

  • Low running costs
  • Easy to change consumables with realistic costs
  • Bench, wall or reservoir top mounting
  • Choice of storage reservoir, 30, 60 or 100 litres
  • Choice of production rates depending on how much water you need during the day
  • Integral boost pump

The Geno is suitable for DI water usage of 10-400 litres per day. DI water is suitable for buffer and media production, sample and reagent diluents, general chemistry, protein electrophoresis, histology, cytology and spectrophotometry. The integral boost pump avoids unexpected costs by providing an uninterrupted feed water supply. The Geno is fed directly from your mains water supply.

Geno saves the environment

Technical Specifications

Type 2 water using reverse osmosis and deionisation technology 

- 1-15 MΩ-cm
- Type 2 Water Quality general laboratory grade water
- >50% recovery of RO water
- Novel recirculation process extends life of RO membrane and DI cartridges
- TOC <50ppb
- Operates at 0.1-6 bar feed water pressure
- Up to 98% rejection of inorganics
- Compact design
- Wall mounting brackets included
- Bench, reservoir-top or wall mounting
- Excellent monitoring of conductivity
- SD Card interface
- Choice of 30/60/100 litre capacity reservoir               

Dimensions 

Width

Height

Depth

490mm

500mm

290mm


Annual Consumables
 

Part No.

Description

TC001

Pre-treatment module (2)

TC002

Endure purification pack 1 (2)*

TC005

(Reservoir) vent filter (1)

*Estimate only, depends on water usage

Accessories 

Part No.

Description

TC008

Tank UV

Reservoirs

 

Width

Height

Depth

TANK30

410mm

500mm

240mm

TANK60

485mm

500mm

330mm

TANK100

485mm

800mm

340mm

TANK100PUMP*

485mm

800mm

340mm

*100 litre tank with built-in pump to provide the correct pressure for feeding washing machines, glasswashers and remote points of use.  

- Including dispense tap on front of the reservoir in the middle or at the bottom
- 3/4” BSP glass-washer outlet
- Pressure sensor level control, with a 0-100% contents display
- 0.2μm microbiological air vent filter or an optional CO2 filter
- 30 and 60 litre reservoirs are wall mountable 

Services required

3/4” BSP isolated cold water feed (washing machine tap/valve)

240 Volt, 13 Amp sockets

Drain/up-stand with trap or sink/tundish

Optional leak detection

If your water system is in a location where a leak could cause damage or health and safety issues, we recommend that you protect against this possibility by means of a leak detector, or for larger systems a containment bund.  Containment bunds, price available on application.  The following are available from Triple Red: 

Part No.

Description

2084

Water Guard for small laboratory equipment up to 100 l/h

00029

Water Guard for larger equipment with a feed connection up to ¾”

    Array ( [status] => 1 [entity_id] => 2661 [attribute_set_id] => 12 [type_id] => simple [created_at] => 2018-06-13 08:09:09 [updated_at] => 2018-09-17 16:05:49 [sku] => ALTO [inventory_in_stock] => 1 [name] => Alto Ultrapure Water Systems [image] => /u/n/untitled_design_43_.jpg [url_path] => [short_description] =>
    • Fast dispense of ultrapure water – variable rate of up to 2 litres per minute
    • Remote dispensers available
    • Quick-change consumables with realistic costs
    • Easy to use software
    • Quiet operation
    • Bench, wall or reservoir top mounting
    • Comprehensive monitoring of water quality including TOC (Total Organic Carbon)
    • Integral boost pump to deal with varying feedwater pressure

    Download Brochure

    [is_salable] => 1 [link_id] => 423 [position] => [request_path] => altotm-type-1-water-ultrapure-water-polisher.html )
  1. Alto Ultrapure Water Systems
    • Fast dispense of ultrapure water – variable rate of up to 2 litres per minute
    • Remote dispensers available
    • Quick-change consumables with realistic costs
    • Easy to use software
    • Quiet operation
    • Bench, wall or reservoir top mounting
    • Comprehensive monitoring of water quality including TOC (Total Organic Carbon)
    • Integral boost pump to deal with varying feedwater pressure

    Download Brochure

    POA
  1. Laboratory Water Consumables

    We supply consumables for all types of laboratory water systems including:

    • Pre treatment cartridges
    • RO cartridges
    • DI cartridges
    • UV lamps
    • Point of use filters

    Submit a quote request and we'll send you a price.

    Download Lab Water System Brochure

    POA
Write Your Own Review
You're reviewing:Geno DI Water Systems