Alto Ultrapure Water Systems

  • Fast dispense of ultrapure water – variable rate of up to 2 litres per minute
  • Remote dispensers available
  • Quick-change consumables with realistic costs
  • Easy to use software
  • Quiet operation
  • Bench, wall or reservoir top mounting
  • Comprehensive monitoring of water quality including TOC (Total Organic Carbon)
  • Integral boost pump to deal with varying feedwater pressure

Download Brochure

Availability: In stock
SKU
ALTO

Alto Ultrapure Water System

The Alto provides ultrapure water on demand. The Alto systems are fed from a pre-treated supply (Puro, Geno or your existing ring main) and produce ultrapure water at 18.2 MΩ-cm, Type 1 swiftly on demand. The integrated dispenser or optional remote dispenser can provide ultrapure water at up to 2 litres per minute as the dispense rate is variable. The output is either continuous or volumetrically dispensed. Just select the dispense rate required with our intuitive and simple software controls.

Features

  • Fast dispense of ultrapure water – variable rate of up to 2 litres per minute
  • Remote dispensers available
  • Quick-change consumables with realistic costs
  • Easy to use software
  • Quiet operation
  • Bench, wall or reservoir top mounting
  • Comprehensive monitoring of water quality including TOC (Total Organic Carbon)
  • Integral boost pump to deal with varying feedwater pressure


The Alto is suitable for Type 1 water usage of up to 120 litres per hour (adequate feed water must be available). Type 1 water is suitable for molecular biology, electrophoresis, cell and tissue culture, sequencing, HPLC, genomics, pharmacology and any other sensitive applications.

TOC monitoring is critical when organics will affect results so a real time TOC reading will provide absolute confidence in your water.

Alto low energy consumption

Technical Specifications

18.2 MΩ-cm Type 1 Water

Compact Type 1 water system, which can be fed from a Geno, Puro or existing ringmain/ RO system. This range of bench-top or wall mounted water systems are specifically designed to save laboratory space while providing high quality water that exceeds all reagent water quality standards through its state-of-the-art water purification technology. 

- Up to 2 litres/min dispense rate
- Dual wavelength UV 185 and 254nm
- Dispense from the unit or from remote dispenser
- Volumetric or continuous control dispensing
- Novel dual cartridge pass mechanism for maximum quality
- SD card interface
- Real time TOC monitoring
- On-bench, under-bench, wall or reservoir-top mounting (brackets included)
- 24-hour circulation mode
- Resistivity meter to measure pre-treated and polished water
- Simple cartridge changing
- First consumables included with unit
- Variable speed quiet motor switches to energy saving mode when not in use
- Built-in automatic self-cleaning/sanitisation mechanism 


Dimensions 

Width

Height

Depth

490mm

670mm*

290mm

*To the top of Dispense Gun, height to the top of the Dispense tube curve is 730mm

 

 Annual Consumables 

 

Alto TOC

Alto TOC UF

Internal UV Lamp (1)

TC003

TC003

Endure purification pack 2 (2)*

TC009

TC009

POU endotoxin filter (2)

 

TC004

POU filter (2)

TC011

 

Sanitisation pack (1)

TC010

TC010

*Estimate only, depends on water usage

 Accessories 

                                    

Width

Height

Depth

Remote dispense stand

250mm

640mm*

255mm

 *To the top of Dispense Gun, height to the top of the Dispense tube curve is 670mm

Services required

3/4” BSP isolated cold water feed (washing machine tap/valve)

240 Volt, 13 Amp sockets

Drain/up-stand with trap or sink/tundish

 

Optional leak detection

If your water system is in a location where a leak could cause damage or health and safety issues, we recommend that you protect against this possibility by means of a leak detector, or for larger systems a containment bund. Containment bunds, price available on application. The following are available from Triple Red:

 

Part No.

Description:

2084

Water Guard for small laboratory equipment up to 100 l/h

00029

Water Guard for larger equipment with a feed connection up to ¾”

    Array ( [status] => 1 [entity_id] => 2670 [attribute_set_id] => 12 [type_id] => simple [created_at] => 2018-06-13 08:09:09 [updated_at] => 2018-09-17 16:04:29 [sku] => GENO [inventory_in_stock] => 1 [name] => Geno DI Water Systems [image] => /u/n/untitled_design_46__1.jpg [url_path] => [short_description] =>

    Geno DI water systems for laboratories and hospitals. Producing general laboratory water, type 2 laboratory water

    • Low running costs
    • Easy to change consumables with realistic costs
    • Bench, wall or reservoir top mountin
    • Choice of storage reservoir, 30, 60 or 100 litres
    • Choice of production rates depending on how much water you need during the day
    • Integral boost pump
    Download Brochure


     

    [is_salable] => 1 [link_id] => 425 [position] => [request_path] => genotm-type-2-water-deionized-water-purification-system.html )
  1. Geno DI Water Systems

    Geno DI water systems for laboratories and hospitals. Producing general laboratory water, type 2 laboratory water

    • Low running costs
    • Easy to change consumables with realistic costs
    • Bench, wall or reservoir top mountin
    • Choice of storage reservoir, 30, 60 or 100 litres
    • Choice of production rates depending on how much water you need during the day
    • Integral boost pump
    Download Brochure


     

    POA
  1. Laboratory Water Consumables

    We supply consumables for all types of laboratory water systems including:

    • Pre treatment cartridges
    • RO cartridges
    • DI cartridges
    • UV lamps
    • Point of use filters

    Submit a quote request and we'll send you a price.

    Download Lab Water System Brochure

    POA
Write Your Own Review
You're reviewing:Alto Ultrapure Water Systems