We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies Learn more.
Edstrom C-440S Controller (120 VAC) with outputs for up to 4 Electric Valves
The C-440S Controller is used to regulate the showering and interval cycles in a livestock cooling system.
$753.11
Availability:
In stock
SKU
7400-8940-015
The C-440S Controller is used to regulate the showering and interval cycles in a dairy cow cooling system. It has output to control up to four 24VAC electric valves. The valves are activated in sequence to reduce water capacity demands on your system.
This easy-to-program controller can be set to operate either in Two-Stage Mode or Smart Mode. Two-Stage Mode provides traditional two-level cooling - a lower intensity cooling cycle operates when the temperature is above the low threshold. A higher intensity cooling cycle operates when the temperature is above the high threshold.
Smart Mode provides innovative, infinite-stage cooling. Interval time is automatically adjusted as the temperature changes. The interval time is the period of time when no showering occurs and the water is allowed to evaporate from the cows. As temperature increases, the interval time will decrease, thus giving animals more frequent shower cycles, to reduce heat stress. This provides exactly the right amount of cooling at any temperature while minimizing water usage.
The C-440S can monitor up to four separate temperature probes to allow accurate cooling in different zones. One temperature probe is pre-wired into the Controller at the factory. If additional probes are desired, they will need to be wired into the Controller on site.
Click here to view a larger image
Features and Benefits
- Operates up to 4 electric solenoid valves/zones in sequence rather than all at once, to reduce water capacity demands on your system
- Monitors up to 4 separate temperature probes to allow accurate cooling in different zones
- Two-Stage Mode provides traditional two-level cooling – a lower intensity cooling cycle (LO Range) operates when the temperature is above the low temperature setting, and a higher intensity cooling cycle (HI Range) operates when the temperature is above the high temperature setting
- Smart Mode provides innovative, infinite stage cooling – it varies the interval time in direct proportion to the tempera- ture difference as the temperature moves between LO Range and HI Range actuation temperature settings, providing exactly the right amount of cooling at any temperature while minimizing water usage
- With Smart Mode, you program the system once – no need to make adjustments as the temperatures change during the season
- Shower time for each electric solenoid valve/zone can be programmed independently – each valve/zone can have a different length shower cycle if desired
- 24 Volt AC power output for safety and ease of installation
- Super bright LED displays for viewing indoors or outdoors
- User programmable – quick and easy to program
- Easy and economical to install and operate – quick return on investment
- Fully compatible with previous model controllers to allow upgrades of existing systems
- 2-Year Factory Warranty
Hardware
Dimensions: 7.75 in. W x 7.5 in. H x 5.5 in. D
[197 mm W x 190 mm H x 140 mm D]
Control Panel
Enclosure: Solid, high-impact engineered thermoplastics
NEMA 4X rating
7 segment high intensity LED characters
Non-volatile
Spec Sheets
