The C-110S Controller is used to regulate the showering and interval cycles in a livestock cooling system.
The C-110S Controller is used to regulate the showering and interval cycles in a dairy cow cooling system and is designed for use in holding pens or smaller feed line soaker systems. It has output to control one 24VAC electric valve. This easy-to-program controller can be set to operate either in Two-Stage Mode or Smart Mode. Two-Stage Mode provides traditional two-level cooling - a lower intensity cooling cycle operates when the temperature is above the low threshold. A higher intensity cooling cycle operates when the temperature is above the high threshold.
The C-110S Controller is easy to program by using the three push buttons on the front panel. The star button toggles through the various settings, and the up or down arrow buttons increase or decrease the settings. You can also toggle between Two Stage Mode and Smart Mode.
Smart Mode provides innovative, infinite-stage cooling. Interval time is automatically adjusted as the temperature changes. The interval time is the period of time when no showering occurs and the water is allowed to evaporate from the cows. As temperature increases, the interval time will decrease, thus giving animals more frequent shower cycles, to reduce heat stress. This provides exactly the right amount of cooling at any temperature while minimizing water usage.
|Product Name||Edstrom C-110S Controller (120 VAC) with output for 1 Electric Valve|