Drip-Line Check Valve 5/32" Barb x 5/32" Barb

Check Valve designed for installation in the Drip-Tubing line just above the Drip Nozzle.
$2.80
Availability: In stock
SKU
2030-6270-100
This Check Valve is designed for installation in the Drip-Tubing line just above the Drip Nozzle to prevent the Drip nozzles from dripping after the supply water has turned off. The Check Valve will open and allow water to flow only when the line pressure exceeds 1.5 psi. When the electric valve on your Drip-Cooling system turns off the flow of water, the Check valve will allow water to flow until the pressure drops to 1.5 psi, at which point it will close, preventing all the water in the overhead lines from slowly draining out between each cycle, and keep them fully charged for instantaneous flow when the next cooling cycle begins.

The Check Valve should be mounted in the Drip-Tubing line no more than 3 ft. below the overhead supply for reliable operation.

More Information
Product Name Drip-Line Check Valve 5/32" Barb x 5/32" Barb
SKU 2030-6270-100
ISO 9001 No
ISO 17025 No
Write Your Own Review
You're reviewing:Drip-Line Check Valve 5/32" Barb x 5/32" Barb