We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Type I - Ultrapure Water
Type III - RO Water
Integrated. Maxium purification power at each stage.
Water Type | Type III (RO Water) | Type I (Ultrapure Water) |
Resistivity (MΩ-cm @ 25 °C) | Ion Rejection Rate <99% | 18.2 |
TOC (ppb) | Organic Rejection Rate <99% | < 5 *** |
Bacteria (cfu/mL) | <0.1 * | <0.1 * |
Particles (0.2 µm) | <1/mL * | <1/mL * |
Endotoxins (Eµm/mL) | - | <0.001 Eµm/mL ** |
* With 0.2 µm bacteria removal final filter | ** With postive charged Nylon KA1 endotoxin removal final filter | *** With feed TOC less than 50 ppb
System | RO | Type I |
Cascada III. I - 5 | 5 L/h | Up to 2 L/min |
Cascada III. I - 10 | 10 L/h | Up to 2 L/min |
Cascada III. I - 20 | 20 L/h | Up to 2 L/min |
Cascada III. I - 30 | 30 L/h | Up to 2 L/min |
* From top on reservoir
Dual Water | Ion Rejection Rate >99% Type 3 & 18.2 MΩ-cm Type 1
Integrated Controls on the Cascada III.I system enable Type III water to be availalbe from the reservoir. Water quality is maintained by optmizing recirculation, UV sterilization and vent filtration to minimize recontamination from CO2 volatile organize compounds, bacteria and particles. The system maximizes purification power at each stage so that the pure and ultrapure water outputs are consistencly high in quality. In addition, unique system monitoring and water leakage protection functions offer peace of mind on your laboratory's pure and ultrapure water supply.
Width |
Height |
Depth |
Dry Weight |
366 mm |
575 mm |
492 mm |
23 kg |
Width |
Height |
Depth |
Dry Weight |
280 mm |
845 mm |
300 mm |
6 kg |
Size |
Width |
Height |
Depth |
Dry Weight |
35 L |
390 mm |
600 mm |
384 mm |
5 kg |
70 L |
390 mm |
900 mm |
384 mm |
7 kg |
105 L |
390 mm | 1200 mm | 384 mm | 9 kg |
Width |
Height |
Depth |
Dry Weight |
220 mm |
463 mm |
380 mm |
7 kg |
Feed Water Requirements | |
Conductivity | < 1500 µS/cm @ 25 °C |
Pressure | 0.5 -6 bar |
Temperature | 5 - 40 °C |
Free Chlorine | < 3 ppm |
Silt Density Index | < 12 |
pH | 4 - 10 |
Electrical Requirements | |
Input Voltage | 100 - 240 V (50-60Hz) |
Power |
<200 VA - Unit 75 VA - Pretreatment |
Temperature | 5 - 40 °C |